Fence made of corrugated sheet: design features, selection rules and style solutions

Fence made of corrugated sheet — such designs have really become very popular due to their practicality and aesthetics. Here are the main points to consider when choosing and installing such a fence:

Advantages:

• strength and durability: corrugated sheet is galvanized steel, which provides high resistance to corrosion and mechanical damage.
• versatility: a wide range of colours and textures allows you to choose an option that will perfectly fit into the landscape and architecture of the site.
• ease of installation: you can install a fence made of corrugated sheets yourself, without resorting to the help of professionals.
• low cost: compared to other materials, corrugated sheets are relatively inexpensive.
• ease of maintenance: such fences do not require special care, it is enough to periodically wash them with water.
• wind and dust protection: the solid structure provides good protection for the area from wind, dust and prying eyes.

The main stages of installing a fence made of corrugated sheets:

• site preparation: plot marking, land leveling.
• installation of poles: metal or concrete poles are installed at a distance of 2-3 meters from each other. They must be well secured in the ground (concreted) to ensure the stability of the structure.
• fastening of logs: horizontal logs (crossbars) are fastened to the posts. Usually two or three logs are used for one span of the fence.
• installation of corrugated sheets: sheets are attached to the joists using screws. It is important to choose the correct length of screws and use washers for better fastening.
• finishing work: installation of plugs on posts, treatment of welded seams with anti-corrosion agents, painting (if necessary).

Recommendations:

• choice of material: pay attention to the thickness of the sheet (optimally 0.5-0.7 mm) and the quality of the coating (galvanized or polymer layer).
• Anti-corrosion treatment: all metal elements (posts, joists, fasteners) must be treated with an anti-corrosion coating.
• Foundation: When installing on soft soils or in windy areas, it is recommended to install the fence on a strip foundation to increase stability.

Common mistakes when installing a fence made of corrugated sheets:

• Incorrect choice of fasteners: using screws that are too short or too long, lack of washers.
• Incorrect installation of posts: insufficient installation depth or weak concreting, which can lead to the fence tilting.
• lack of metal protection: neglect of anti-corrosion treatment of metal elements.

Following these recommendations will help you install a strong and durable fence made of corrugated sheets that will please you for many years.

Are fences made of corrugated sheets simple structures?

Fences made of corrugated sheets really seem to be quite simple structures, and they can be installed independently if you have some skills and tools. However, there are several factors that will help you decide whether you should undertake the installation yourself or turn to professionals.

Self-installation

Advantages:

• saving money on workers’ wages.
• flexibility and control: you manage the entire process yourself, you can work at a time convenient for you and control the quality of work.

Flaws:

• Time and effort: installing a fence requires a significant amount of time and effort.
• need for special tools: for installation you will need a drill for holes, a concrete mixer or a container for mixing concrete, a level, a grinder, a screwdriver, etc.
• experience and knowledge: Basic knowledge and experience in construction is necessary to avoid mistakes that can affect the durability and appearance of the fence.
• risks of errors: incorrect installation can lead to deformation of the fence, its instability or premature corrosion.

Appeal to professionals

Advantages:

• quality of work: professionals have the experience and knowledge to do the job efficiently and quickly.
• guarantees: many companies provide a guarantee for the work performed.
• Saved time and effort: You don’t have to worry about installing it yourself, so you can focus on other things.
• comprehensive approach: professionals can offer additional services such as design, material selection and after-sales service.

Flaws:

• Cost: Professional services cost money, which increases the overall budget for the fence.
• need for control: you will still need to control the process to ensure that the work is done well.

In other words, if you have experience and confidence in your abilities, as well as the necessary tools, installing this type of fence yourself can be a good option. However, if you doubt your abilities or do not want to spend a lot of time on this work, it is better to turn to professionals.

Selection of materials

Quality of corrugated sheets:

• metal thickness: the optimal thickness of sheets for fences is 0.5-0.7 mm. Thinner sheets may be less resistant to wind loads and mechanical damage.
• coating: the corrugated sheet must be galvanized and have a polymer coating (polyester, plastisol, PVDF). This will protect the metal from corrosion and increase the service life of the fence.
• wave height: for fences, corrugated sheets with a wave height of 20-35 mm (marking C20, C21, etc.) are usually used. It is quite rigid and stable.

Pillars and joists:

• Material of the pillars: it is better to choose metal pillars, as they are more durable and resistant to loads. The recommended diameter of the pillars is 60-80 mm.
• pillar wall thickness: the optimal pillar wall thickness is 2-3 mm. Thinner pillars may not be able to withstand the loads.
• joists (crossbars): use metal profiles with a cross-section of 40×20 mm or 50×25 mm. The optimal wall thickness is 1.5-2 mm.

Fasteners:

• Self-tapping screws: use galvanized self-tapping screws with neoprene gaskets. The length of the self-tapping screws should be 20-25 mm for fastening the profiled sheet to the joists.
• Fastening the posts: Use anchors or concrete to secure the posts.

Installation

Preparing the area:

• Mark out the area for the fence, check the evenness of the installation line.
• remove all obstacles (rocks, bushes, trees).

Installation of poles:

• The distance between the posts should be 2-3 meters.
• the installation depth of the pillars is not less than 1/3 of their height (usually 0.8-1.2 meters).
• The pillars should be concreted to ensure stability. The diameter of the holes for the pillars is 30-40 cm.

Installation of logs:

• horizontal joists are attached to the posts at a height of about 30-40 cm from the ground and at a height of 1.5-1.7 meters.
• The logs can be attached to the posts with by welding or bolts.

Fastening of corrugated sheets:

• The sheets of corrugated metal are attached to the joists with self-tapping screws at intervals of 20-30 cm. The fasteners should be located on the crest of the wave.
• The corrugated sheet is installed with an overlap of one wave.

Finishing touches:

• Install caps on the tops of the posts to prevent moisture from entering.
• Treat all welds with an anti-corrosion agent and paint if necessary.

An important question is: what is the service life of fences made of corrugated sheets?

The basis for the production of profiled sheets is low-carbon sheet steel, on the surface of which a polymer or zinc protective coating is applied. Due to this, metal products are well resistant to moisture and other negative impacts. As a result, the service life of the profiled sheet is at least 60 years, — note the specialists of «Zabor-vam».

Fences made of corrugated sheets — style solutions

Fences made of corrugated sheets (profiled sheets) may seem primitive compared to some other materials, such as forged metals or wood, but this is not always the case. There are various ways to give such a fence an aesthetically pleasing look. Here are some style solutions and recommendations that will help make a fence made of corrugated sheets more stylish and attractive:

Style solutions for fences made of corrugated sheets

Choice of color and texture:

• Profiled sheeting is available in a wide range of colors and coatings. You can choose a bright color that will harmonize with the facade of the house or the landscape design of the site.
• There are profiled sheets with a textured coating that imitates wood, stone or brick, which adds originality.

Use of decorative elements:

• forging and metal inserts: you can add forged elements that will give the fence sophistication and uniqueness.
• Decorative caps and end caps: Decorating the tops of posts with decorative caps improves the appearance of the fence.
• Combination of materials: you can combine corrugated sheets with other materials, such as wood or stone, which will create interesting contrasting solutions.

Design of gates and wickets:

• Gates and wickets can be made more attractive by using forged elements, decorative overlays or by combining materials.

Plants and greenery:

• Hedges, climbing plants or flower beds along the fence can soften its severe appearance and make it more natural.

Lighting:

• Installing decorative lighting along the fence will highlight its lines and create a cozy atmosphere at night.

Examples of style solutions

Modern:

• use of corrugated sheets with a matte coating in dark tones (graphite, anthracite) in combination with minimalist metal elements.
• simple and strict lines, absence of excessive decorativeness.

Eco-style:

• profiled sheet with wood texture or natural shades.
• adding living plants and green spaces to the fence.

Classic style:

• light shades of corrugated sheets combined with forged elements and decorative pillars.
• gates and wickets with a classic design, decorated with forging.

Although corrugated sheet fences may seem simple, with the right approach they can become a stylish and attractive element of your property. It is important to consider the overall style of the house and landscape so that the fence fits harmoniously into the environment. With a variety of colors, textures and decorative elements, you can create a unique design that will highlight your individuality and aesthetic preferences.

source: https://zabor-vam.ru/product/zabory-iz-profnastila/