How to Install PVC Panels: Step-by-Step Guide

Installation of lathing

Installing PVC panels on walls is a great way to update the interior without resorting to major repairs. One of the key stages of this process is the installation of the lathing, which serves as the basis for fastening.

Selection of material

This is the first and most important step in installation. The lathing can be made of wooden beams or metal profiles. Wooden beams are a traditional and affordable option that can be easily found in any hardware store. However, they can be exposed to moisture, which can lead to deformation. Metal profiles, on the other hand, are highly durable and long-lasting, but can be more expensive and require special tools for installation. When choosing a material, it is important to consider the operating conditions of the premises and the project budget.

Wall mounting

After selecting the material, it is necessary to properly secure the lathing to the wall. To do this, first mark the walls, determining the places where the bars or profiles will be attached. Usually, the lathing is installed with a step of 30-40 cm, which ensures reliable fixation. It is important that the lathing is installed strictly vertically and horizontally; you can use a building level for this.

The wooden bars are fastened to the wall using dowels and screws. Metal profiles are fastened in a similar way, but may require additional fasteners, such as hangers or anchors. It is important that the fasteners are securely fixed in the wall to avoid loosening of the lathing during operation.

Installation of the lathing is an important stage, on which the quality and durability of the entire structure depends. The correct choice of material and reliable fastening of the lathing to the wall will provide a smooth and durable surface for installation, which will allow you to create an aesthetic and durable interior.

Installing the first panel

First, you need to prepare the surface: clean it from dust and dirt, and remove old coatings. Then measure and mark the walls to make sure they will be level. The first panel is installed in the corner of the room, starting from the bottom of the wall. Use a level to check the verticality. Secure it with screws or glue, depending on the type of surface and preferences.

Securing subsequent panels

After installing the first board, you can proceed to fixing the subsequent ones. PVC panels are equipped with special locking joints that allow you to quickly and easily connect them together. Follow these steps:

1. Insert the next panel into the lock of the already installed board.

2. Make sure they fit tightly together.

3. Secure it with screws or glue.

Repeat these steps until the entire surface is covered. To install the last board, you may need to cut it to size so that it fits perfectly into the remaining space.

Installing PVC panels is a simple and effective way to update your interior. Following our step-by-step guide, you can do this task yourself, saving time and money.